Serviceline Information

Phone: 330-486-0001
Fax: 330-405-4710


  • Dual sensor with two Light spots
  • Light spot signals internally "OR" connected
  • Precise background suppression
  • Very small black-white difference
  • Metal-reinforced fastening holes
  • Tamper-proof version with no adjustments
  • Push-pull output

Download the complete datasheet as a PDF


Datasheet excerpt: Technical data of ML4.2-8-H-20-IR/DS/40b/95/110

Product Description
Dual background suppression sensor
General specifications
Detection range7 ... 20 mm
Light source2 IRED
Light typemodulated infrared light , 880 nm
Black/White difference (6 %/90 %)approx. 1 mm
Diameter of the light spot2 light spots:
size 2.5 mm
distance 5 mm at 20 mm
Angle of divergenceapprox. 5 °
Functional safety related parameters
MTTFd1940 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Function indicatorLEDs yellow: light up when object is detected
Electrical specifications
Operating voltage10 ... 30 V DC
Output
Switching typelight/dark on electrically switchable
Signal output1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected
Compliance with standards and directives
Standard conformity
Product standardEN 60947-5-2:2007
IEC 60947-5-2:2007
Shock and impact resistanceIEC / EN 60068. half-sine, 40 g in each X, Y and Z directions
Vibration resistanceIEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions
Mechanical specifications
Degree of protectionIP67 / IP69K
ConnectionM8 x 1 connector, 4-pin
Material
HousingABS
Optical faceglass pane

Documents: ML4.2-8-H-20-IR/DS/40b/95/110

Instruction leafletsLanguageFile TypeFile Size
Beipackzettel/Instruction leafletALLPDF421 KB

CAD+CAE: ML4.2-8-H-20-IR/DS/40b/95/110

CADFile TypeFile Size
3D Modell/3D modelIGS443 KB
3D Modell/3D modelSTP331 KB

Associated Products: ML4.2-8-H-20-IR/DS/40b/95/110

AccessoriesName
OMH-4.1Mounting aid
OMH-ML6Mounting aid
OMH-ML6-UMounting aid
OMH-ML6-ZMounting aid
V31-GM-2M-PVCFemale connector
V31-WM-2M-PVCFemale connector