Serviceline Industrial Sensors
Phone: 330-486-0001
Fax: 330-405-4710
Serviceline Explosion Protection
Phone: 330-486-0002
Fax: 330-963-5827

Ultrasonic sensor UMC3000-30H-I-5M

UMC3000-30H-I-5M
  • Front of transducer and housing manufactured entirely from stainless steel
  • Degree of protection IP68 / IP69K
  • Programmable via DTM with PACTWARE
  • Mounting bracket MH-30H-01 included in delivery

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Datasheet excerpt: Technical data of  UMC3000-30H-I-5M

Product Description
Single head system
General specifications
Sensing range200 ... 3000 mm
Adjustment range240 ... 3000 mm
Dead band0 ... 200 mm
Standard target plate100 mm x 100 mm
Transducer frequencyapprox. 100 kHz
Response delay≤ 200 ms
Indicators/operating means
LED greenOperating display
LED yellowobject in evaluation range
LED rederror
Electrical specifications
Operating voltage10 ... 30 V DC
No-load supply current≤ 50 mA
Time delay before availability≤ 400 ms
Input/Output
Input/output type1 synchronization connection, bidirectional
0 Level0 ... 1 V
1 Level4 V ... UB
Input impedance> 12 kΩ
Output current< 12 mA
Pulse length≥ 200 µs
Pulse interval≥ 2 ms
Synchronization frequency
Common mode operation≤ 20 Hz
Multiplex operation≤ 20/n Hz, n = number of sensors n ≤ 10 (factory setting: 5 )
Input
Input type1 program input
Level (evaluation limit 1)0 ... 1 V
Level (evaluation limit 2)3 V ... UB
Input impedance> 12 kΩ
Pulse length2 ... 5 s
Output
Output type1 analog output 4 ... 20 mA
ResolutionEvaluation range [mm]/3200, however ≥ 0.4 mm
Deviation of the characteristic curve≤ 0.2 % of full-scale value
Repeat accuracy≤ 0.1 % of full-scale value
Load impedance≤ 500 Ω at UB ≥ 14V
≤ 300 Ω at UB < 14V
Temperature influence≤ 1.5 % of full-scale value
Compliance with standards and directives
Standard conformity
StandardsEN IEC 60947-5-2:2020
IEC 60947-5-2:2019
EN 60947-5-7:2003
IEC 60947-5-7:2003
Approvals and certificates
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-25 ... 60 °C (-13 ... 140 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection typecable PUR , 5 m
Core cross section5 x 0.5 mm2
Degree of protectionIP68 / IP69K
Material
HousingStainless steel 1.4404 / AISI 316L
LED window: VMQ Elastosil LR 3003/Shore 50 A
TransducerStainless steel 1.4435 / AISI 316L
Mass425 g
Dimensions
Length100 mm
Diameter30 mm
Factory settings
Outputevaluation limit A1: 240 mm
evaluation limit A2: 3000 mm
output function: rising ramp
General information
Supplementary informationSwitch settings of the external programming adapter:
"output load": pull-down
"output logic": noninv

Classifications

SystemClasscode
ECLASS 13.027272803
ECLASS 12.027272803
ECLASS 11.027272803
ECLASS 10.0.127272803
ECLASS 9.027272803
ECLASS 8.027272803
ECLASS 5.127272803
ETIM 9.0EC001849
ETIM 8.0EC001849
ETIM 7.0EC001849
ETIM 6.0EC001849
ETIM 5.0EC001849
UNSPSC 12.141111960

Details: UMC3000-30H-I-5M

The enclosure and transducer of this ultrasonic sensor form a hermetically sealed unit. Therefore the sensor is suitable for all applications where a very high tightness is required. Since the sensor housing is made exclusively of V4A stainless steel and all seals are made of highly chemical-resistant materials, this sensor is also predestined for use in chemically aggressive environments.

For reliable operation, due to the special design of this sensor, solely the enclosed mounting accessories must be used.

Datasheet: UMC3000-30H-I-5M

DatasheetFile TypeFile Size
Datasheet UMC3000-30H-I-5MPDF746 KB
Fiche de données UMC3000-30H-I-5MPDF765 KB
Datenblatt UMC3000-30H-I-5MPDF734 KB
データシート UMC3000-30H-I-5MPDF430 KB
Hoja de datos UMC3000-30H-I-5MPDF767 KB

Documents: UMC3000-30H-I-5M

Instruction leafletsFile TypeFile Size
Commissionning instructions UMC*-*30H* with 1 analog output / Inbetriebnahmeanleitung UMC*-*30H* mit 1 AnalogausgangPDF366 KB

Approvals+Certificates: UMC3000-30H-I-5M

Declaration of ConformityFile TypeFile Size
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)PDF47 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)PDF40 KB

Software: UMC3000-30H-I-5M

Device type managers (DTM)File TypeFile Size
DTM for L2 and UMC3000 devices / DTM für Geräte der Serien L2 und UMC3000ZIP5005 KB
Software Tools
PACTware 4.1 SP6 / PACTware 4.1 SP6ZIP43327 KB
PACTware 5.0 / PACTware 5.0ZIP44203 KB

Associated Products: UMC3000-30H-I-5M

Accessories

44.00  USD
Netlist price. Your individual price will be calculated during checkout.

In stock

Male cordset, M12, 5-pin, PUR cable with WAGO terminalsfa
272.00  USD

Contact Us

Programming adapter, USB 2.0 interface, Simple insertion in the sensor connection leadfa
Mounting aid, 30 mm, Retainer for 30 mm cylindrical sensors with smooth housing, Installation in 3 ... 12 mm thick sheet metal, Simple installation and exact settingfa
USi-safety Sensor System

The USi-safety ultrasonic sensor system is breaking new ground for safety applications—whether in challenging, dusty environments or in outdoor areas.

Pepperl+Fuchs offers you various downloadable documents containing knowledge on ultrasonic sensors.