Serviceline Industrial Sensors
Phone: 330-486-0001
Fax: 330-405-4710
Serviceline Explosion Protection
Phone: 330-486-0002
Fax: 330-963-5827

Magnetic Immersion Probe for Continuous Measurement LMC-P

LMC-P
  • Sensor for continuous level measurement in liquids
  • Resolution 10 mm
  • Media contacting parts of plastic
  • Mounting without removing the float

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Datasheet excerpt: Technical data of  LMC-P

General specifications
Equipment architectureA measuring system consists of a magnet-operated immersion probe LMC****-G6*-O4 and a signal converter S1SD-1TI-1U.
SeriesLMC-P
VersionsLMC10P6-G6P-O4
LMC10D5-G6D-O4
Output
Connection3-wire, potentiometer connection approx. 40 kΩ
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 61326-1:2013 , EN 61326-2-3:2013
Conformity
Degree of protectionIEC 60529:2000
Measurement accuracy
Accuracyresolution: 10 mm
Operating conditions
Process conditions
Process temperatureversion PP: -10 ... 80 °C (14 ... 176 °F)
version PVDF: -10 ... 100 °C (14 ... 212 °F)
Process pressure (static pressure)≤ 3 bar (43.5 psi)
Density≥ 0.8 g/cm3
Ambient conditions
Ambient temperature-20 ... 70 °C (-4 ... 158 °F)
Mechanical specifications
Degree of protectionIP66 / IP68
Connectionterminal box, 3 terminals , max. 2.5 mm2
Materialfloat, guide tube, process connection:
- version PP: PP (Polypropylene)
- version PVDF: PVDF (Polyvinylidenfluoride)
terminal box: Polyester
Dimensionsfloat:
- version PP: cylinder ∅55 mm x 54 mm
- version PVDF: cylinder ∅55 mm x 70 mm
guide tube: ∅14 mm, max. length 3000 mm
terminal box: 80 x 75 x 55 mm
Process connectionthread G2A to DIN/ISO 228/1
General information
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Accessories
Designation- LML-FD5 float, cylinder, Ø55 mm x 70 mm, PVDF
- LML-FP6 float, cylinder, Ø55 mm x 54 mm, PP

Classifications

SystemClasscode
ECLASS 13.027200502
ECLASS 12.027200502
ECLASS 11.027200502
ECLASS 10.0.127200502
ECLASS 9.027200502
ECLASS 8.027200502
ECLASS 5.127200502
ETIM 9.0EC001447
ETIM 8.0EC001447
ETIM 7.0EC001447
ETIM 6.0EC001447
ETIM 5.0EC001447
UNSPSC 12.141111950

Details: LMC-P

The device is a sensor for continuous level measurement in liquids.

A ring magnet integrated in the float activates a reed contact resistance chain inside the probe tube via its magnetic field.

If the level changes, the resistance chain changes its total resistance by closing the contact at the float level. The resistance is converted into a standardised output signal by a control unit. This output signal is proportional to the level of the measured medium.

Datasheet: LMC-P

DatasheetFile TypeFile Size
Datasheet LMC-PPDF222 KB
Datenblatt LMC-PPDF225 KB

Documents: LMC-P

ManualsFile TypeFile Size
Manual LMC-**PDF835 KB
Handbuch LMC-**PDF838 KB
Instruction manuals
ИнструкцииPDF125 KB
Návod k poużitíPDF120 KB
Instruktions manualPDF119 KB
Instruction manualPDF43 KB
KasutusjuhendPDF116 KB
KäyttöohjePDF0 KB
Manuel d'instructionsPDF49 KB
BetriebsanleitungPDF45 KB
Οδηγίες χρήσηςPDF0 KB
HandleidingPDF120 KB
Instruction manual / BetriebsanleitungPDF118 KB
Használati útmutatóPDF120 KB
Manuale di istruzioniPDF46 KB
Lietošanas pamācībaPDF0 KB
Instrukciju vadovasPDF121 KB
Instrukcja obsługiPDF121 KB
Manual de instruçõesPDF119 KB
Manual de utilizarePDF119 KB
Návod na poużitiePDF119 KB
Navodila za uporaboPDF118 KB
Manual de instruccionesPDF48 KB
ManualPDF118 KB
Technical information
Contamination declaration / KontaminationserklärungPDF137 KB

Approvals+Certificates: LMC-P

Declaration of ConformityFile TypeFile Size
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)PDF64 KB