Serviceline Industrial Sensors
Phone: 330-486-0001
Fax: 330-405-4710
Serviceline Explosion Protection
Phone: 330-486-0002
Fax: 330-963-5827

Activator BT-F130-A

BT-F130-A
  • Suitable for mounting on valve actuators for use in valve technology
 in stock
20.00 USD
Netlist price. Your individual price will be calculated during checkout.
Unit Price 

Quantity

Free Shipping

Purchase on Account

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  BT-F130-A

Product Description
Actuator for F130 series
Mechanical specifications
Shaft diameter< 27.5 mm
Shaft height20 mm
Material
HousingMounting component: PBT
Spacer diskPP (1 unit, 5.5 mm strong)
Stopper capPBT (1 unit black)
Mounting screwfor activator: 1.4305 / AISI 303 (1 piece M6 x 25)
Mass25 g

Classifications

SystemClasscode
ECLASS 13.027274002
ECLASS 12.027274002
ECLASS 11.027270103
ECLASS 10.0.127270103
ECLASS 9.027270103
ECLASS 8.027270191
ECLASS 5.127270191
ETIM 9.0EC001487
ETIM 8.0EC001487
ETIM 7.0EC001487
ETIM 6.0EC001487
ETIM 5.0EC003015
UNSPSC 12.131251509

Details: BT-F130-A

Design / Simulation: BT-F130-A

Language Selection:
CADLanguageFile TypeFile Size
CAD 3-D / CAD 3-DALLSTP491 KB
CAD Portal / CAD PortalALLLINK---

Associated Products: BT-F130-A

Accessory of

367.00  USD
Netlist price. Your individual price will be calculated during checkout.

In stock

Measuring range 0 ... 360°, Analog output 4 mA ... 20 mA, Adjustable switch points, Output polarity: DC, Measurement range: 360°, Type of voltage: DC, Output type: 2 switch outputs PNP, NO , reverse polarity protected , short-circuit protected, Output type: 1 current output: 4 ... 20 mA, UL approval: cULus Listed, General Purpose, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V, Connection type: 5-pin, M12 x 1 connectorfa
291.00  USD
Netlist price. Your individual price will be calculated during checkout.

In stock

Analog output, load-dependent voltage or current, Parameterisable measuring range, Measurement range: max. 360°
min. 45°, Operating voltage: 18 ... 30 V DC, Output type: current output or voltage output (load dependend)
4 ... 20 mA (RL < 400 Ω)
0 ... 10 V (RL > 3.3 kΩ), UL approval: cULus Listed, General Purpose, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V, Connection type: 5-pin, M12 x 1 connectorfa
Analog position indicator with end position monitoring, 2 configurable switching frames, Preset range of angle measurement 0 ... 90°, Extended analog signal range, Measurement range: max. 180°
min. 90°, Operating voltage: 18 ... 30 V DC, Output type: 2 switch outputs PNP, NO , reverse polarity protected , short-circuit protected , programmable, Output type: current output
3.8 ... 20.5 mA (RL < 400 Ω), UL approval: cULus Listed, General Purpose, Class 2 Power Sourcefa
Analog output, load-dependent voltage or current, 2 configurable switching frames, Parameterisable measuring range, Measurement range: max. 360°
min. 45°, Operating voltage: 18 ... 30 V DC, Output type: 2 switch outputs PNP, NO , reverse polarity protected , short-circuit protected , programmable, Output type: current output or voltage output (load dependend)
4 ... 20 mA (RL < 400 Ω)
0 ... 10 V (RL > 3.3 kΩ)fa
3 configurable switching frames, Measurement range: max. 360°
min. 5°, Operating voltage: 18 ... 30 V DC, Output type: 3 switch outputs PNP, NO , reverse polarity protected , short-circuit protected , programmable, UL approval: cULus Listed, General Purpose, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V, Connection type: 5-pin, M12 x 1 connector, Degree of protection: IP67, Housing: PBTfa