Inductive sensor NBN40-U2K-N0
- Sensor head bidirectional and rotatable
- 40 mm non-flush
NAMUR sensors must be operated with approved switch amplifiers. Please find suitable devices below:
Contact Us
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Datasheet excerpt: Technical data of NBN40-U2K-N0
| General specifications | ||
|---|---|---|
| Switching function | Normally closed (NC) | |
| Output type | NAMUR | |
| Rated operating distance | 40 mm | |
| Installation | non-flush | |
| Assured operating distance | 0 ... 32.4 mm | |
| Actual operating distance | 36 ... 44 mm | |
| Reduction factor rAl | 0.31 | |
| Reduction factor rCu | 0.3 | |
| Reduction factor r304 | 0.74 | |
| Output type | 2-wire | |
| Nominal ratings | ||
| Nominal voltage | 8.2 V (Ri approx. 1 kΩ) | |
| Switching frequency | 0 ... 150 Hz | |
| Hysteresis | typ. 5 % | |
| Reverse polarity protection | yes | |
| Short-circuit protection | yes | |
| Current consumption | ||
| Measuring plate not detected | min. 2.2 mA | |
| Measuring plate detected | ≤ 1 mA | |
| Switching state indicator | LED, yellow | |
| Functional safety related parameters | ||
| MTTFd | 1415 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 |
|
| Electromagnetic compatibility | NE 21:2007 | |
| Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
|
| Approvals and certificates | ||
| IECEx approval | ||
| Equipment protection level Ga | IECEx PTB 11.0021X | |
| Equipment protection level Gb | IECEx PTB 11.0021X | |
| Equipment protection level Da | IECEx PTB 11.0021X | |
| Equipment protection level Mb | IECEx PTB 11.0021X | |
| ATEX approval | ||
| Equipment protection level Ga | PTB 00 ATEX 2032 X | |
| Equipment protection level Gb | PTB 00 ATEX 2032 X | |
| Equipment protection level Da | PTB 00 ATEX 2032 X | |
| UL approval | ||
| Ordinary Location | E87056 | |
| Hazardous Location | E501628 | |
| Control drawing | 116-0451 | |
| CCC approval | ||
| Hazardous Location | 2020322315002303 | |
| NEPSI approval | ||
| NEPSI certificate | GYJ16.1394X | |
| CML approval | on request | |
| ANZEx | 19.3001X | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 100 °C (-13 ... 212 °F) | |
| Storage temperature | -40 ... 100 °C (-40 ... 212 °F) | |
| Mechanical specifications | ||
| Connection type | screw terminals | |
| Information for connection | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % |
|
| Core cross section | up to 2.5 mm2 | |
| Minimum core cross-section | without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2 | |
| Maximum core cross-section | without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2 | |
| Housing material | PA | |
| Sensing face | PA | |
| Degree of protection | IP68 / IP69K | |
| Mass | 225 g | |
| Dimensions | ||
| Height | 40 mm | |
| Width | 40 mm | |
| Length | 118 mm | |
| Note | Tightening torque: 1.8 Nm (housing) | |
| General information | ||
| Use in the hazardous area | see instruction manuals | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27274001 |
| ECLASS 12.0 | 27274001 |
| ECLASS 11.0 | 27270101 |
| ECLASS 10.0.1 | 27270101 |
| ECLASS 9.0 | 27270101 |
| ECLASS 8.0 | 27270101 |
| ECLASS 5.1 | 27270101 |
| ETIM 9.0 | EC002714 |
| ETIM 8.0 | EC002714 |
| ETIM 7.0 | EC002714 |
| ETIM 6.0 | EC002714 |
| ETIM 5.0 | EC002714 |
| UNSPSC 12.1 | 39121550 |
Details: NBN40-U2K-N0
Datasheet: NBN40-U2K-N0
| Datasheet | File Type | File Size |
|---|---|---|
| Datasheet NBN40-U2K-N0 | 625 KB | |
| Datasheet NBN40-U2K-N0 | 622 KB | |
| Fiche de données NBN40-U2K-N0 | 623 KB | |
| Datenblatt NBN40-U2K-N0 | 622 KB | |
| Scheda tecnica NBN40-U2K-N0 | 623 KB | |
| Datasheet NBN40-U2K-N0 | 628 KB | |
| Folha de dados NBN40-U2K-N0 | 624 KB | |
| Hoja de datos NBN40-U2K-N0 | 624 KB | |
| Datasheet NBN40-U2K-N0 | 635 KB |
Documents: NBN40-U2K-N0
| Instruction manuals | File Type | File Size |
|---|---|---|
| Инструкции | 195 KB | |
| Návod k poużití | 188 KB | |
| Instruktions manual | 186 KB | |
| Instruction manual | 188 KB | |
| Kasutusjuhend | 181 KB | |
| Käyttöohje | 180 KB | |
| Manuel d'instructions | 191 KB | |
| Betriebsanleitung | 187 KB | |
| Οδηγίες χρήσης | 198 KB | |
| Handleiding | 187 KB | |
| Instruction manual / Betriebsanleitung | 185 KB | |
| Használati útmutató | 190 KB | |
| Manuale di istruzioni | 188 KB | |
| Lietošanas pamācība | 187 KB | |
| Instrukciju vadovas | 188 KB | |
| Instrukcja obsługi | 188 KB | |
| Manual de instruções | 190 KB | |
| Manual de utilizare | 191 KB | |
| Návod na poużitie | 188 KB | |
| Navodila za uporabo | 185 KB | |
| Manual de instrucciones | 190 KB | |
| Manual | 185 KB | |
| Technical information | ||
| Installation conditions | 195 KB | |
| Einbaubedingungen | 134 KB |
CAD+CAE: NBN40-U2K-N0
| CAD | File Type | File Size |
|---|---|---|
| CAD 3-D / CAD 3-D | STP | 2003 KB |
| CAD Portal / CAD Portal | LINK | --- |
Approvals+Certificates: NBN40-U2K-N0
| Certificates | File Type | File Size |
|---|---|---|
| Australia Test Safe | 6749 KB | |
| Canada USA UL Hazardous Location | 412 KB | |
| Canada USA UL Ordinary Location | 547 KB | |
| China SITIIAS CCC Ex Certificate | 3783 KB | |
| EU PTB ATEX ia 2G, 1G, 1D s. certificate | 12357 KB | |
| Japan CML Ex ia | 468 KB | |
| United Kingdom CML UKEX Category I M2 UKEX Category II 2 G UKEX Category II 1 D UKEX Category II 1 G | 420 KB | |
| Worldwide PTB IECEx ia | LINK | --- |
| Control Drawings | ||
| Control drawing UL / Control drawing UL | 294 KB | |
| Declaration of Conformity | ||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | 1334 KB | |
| UK Declaration of Conformity (P+F) | 1328 KB |
Associated Products: NBN40-U2K-N0
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
Our amplify article gives interesting insights about the development of the new, modern portfolio of inductive proximity sensors from Pepperl+Fuchs. Get the whole story here!
The knowledge base for inductive sensors contains extensive expertise and supports you in the highly precise and smooth operation of the sensors in your machinery and plants.
The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!
As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.
Pepperl+Fuchs Inc.
1600 Enterprise Parkway
Twinsburg, OH 44087
United States of America
sales@us.pepperl-fuchs.com
+1 330 425-3555
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified. Pepperl+Fuchs does not sell personal data.