Serviceline Industrial Sensors
Phone: 330-486-0001
Fax: 330-405-4710
Serviceline Explosion Protection
Phone: 330-486-0002
Fax: 330-963-5827
Not available for purchase
Not available for purchase

Bullet WirelessHART Adapter WHA-BLT-F9D0-N-A0-Z1-1

WHA-BLT-F9D0-N-A0-Z1-1
  • Installation in Zone 1, 21
  • Installation in Class I, II, Division 1
  • Installation in Class III
  • Ex d housing for Ex d field devices
  • Cast aluminum housing
  • Loop powered
  • Direct mounting on HART or 4 mA ... 20 mA field device
  • Encapsulated antenna
  • Up to 8 field devices in multidrop

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  WHA-BLT-F9D0-N-A0-Z1-1

Supply
Rated voltage7 ... 32 V DC
Rated current< 1 mA , max. 25 mA
Electrical specifications
Output current3.2 ... 25 mA
Supplyloop power for field devices
voltage: 1 ... 2.5 V DC, adjustable in steps of 0.5 V
Input
Connection- 5 wires, 600 mm long, exiting from male thread NPT1/2
- 1 external grounding point
HART communication
ProtocolHART 7.1, backward compatible
Number of devicesup to 8 HART field devices (depending on installation)
Output
Interfaceinternal antenna
CommunicationWirelessHART specifications
- physical layer: IEEE 802.15.4.2006
- frequency band: 2.4 GHz (ISM band, licence free)
- maximum transmit power: +10 dBm
- outdoor transmission range: 235 m
- communication standard: WirelessHART acc. to IEC 62591
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 61326-1:2013+A11:2013
Radio and telecommunication terminal equipmentThe usage of 2.4 GHz equipment is bound to local restrictions. Ensure that restrictions allow usage of this product before commisioning.
Directive 2014/53/EUEN 300 328 V1.8.1:2012
EN 301 489-1 V1.9.2:2011
EN 301 489-17 V2.2.1:2012
FCC CFR47 Part 15 B and CANSI C63.4-2003 , FCC ID: X89-WA1101
Conformity
Degree of protectionIEC 60529:2013
Ambient conditions
Ambient temperaturetemperature class T5: -40 ... 85 °C (-40 ... 185 °F)
temperature class T6: -40 ... 75 °C (-40 ... 167 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Relative humiditymax. 100 %
Mechanical specifications
Degree of protectionIP67
Materialaluminum alloy with polyurethane enamel paint
Mass460 g
Dimensions60.8 x 60.8 x 100 mm (l x w x h)
Height100 mm
Diameter60.8 mm
Data for application in connection with hazardous areas
EU-type examination certificateFM 12 ATEX 0021 X
MarkingEx-Hexagon II 2 G Ex db IIC T6...T5 Gb
Ex-Hexagon II 2 D Ex tb IIIC T95°C Db
Directive conformity
Directive 2014/34/EUEN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010
International approvals
FM approvalCoC 3041762(C)
Approved forClass I, Zone 1, (A)Ex db IIC T6/T5 Gb
Class I, Zone 21, (A)Ex tb IIIC T95°C Db
Class I, Division 1, Groups A - D
Class II, Division 1, Groups E, F, G
Class III
IECEx approvalIECEx FMG 12.0005X
Approved forEx db IIC T6...T5 Gb
Ex tb IIIC T95°C Db
StandardsIEC 60079-0:2011 , IEC 60079-1:2014 , IEC 60079-31:2013
General information
Supplementary informationEC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.

Classifications

SystemClasscode
ECLASS 13.027210192
ECLASS 12.027210192
ECLASS 11.027210192
ECLASS 10.0.127210190
ECLASS 9.027210190
ECLASS 8.027210190
ECLASS 5.127242692
ETIM 9.0EC001604
ETIM 8.0EC001604
ETIM 7.0EC001604
ETIM 6.0EC001604
ETIM 5.0EC001604
UNSPSC 12.139121008

Details: WHA-BLT-F9D0-N-A0-Z1-1

Function

The device upgrades a conventional HART or 4 ... 20 mA field device with a WirelessHART interface.

The supply is ensured via loop power. The adapter with type of protection Ex d can be used directly on a field device with type of protection Ex d. Up to 8 HART field devices can be connected to each other in multidrop mode. The encapsulated antenna allows for use in harsh environments.

The device can be programmed with a configuration tool easily (DTM or DD).

Informative Literature: WHA-BLT-F9D0-N-A0-Z1-1

Language Selection:
LiteratureLanguageFile TypeFile Size
Application Report - Outdoor Monitoring of Gas Limit ValuesENGPDF158 KB
Application Report - WirelessHART Adapter Bullet Enables More Flexibility for Mobile Mixing TanksENGPDF129 KB
Application Report - WirelessHART Connects Mobile Measurement StationsENGPDF149 KB
Application Report - Wirelessly Networked Tank FarmsENGPDF736 KB

Product Documentation: WHA-BLT-F9D0-N-A0-Z1-1

Language Selection:
System DescriptionsLanguageFile TypeFile Size
Patent InformationENGPDF365 KB
Safety and Security Documentation
Instruction manualENGPDF53 KB
Manuals
ManualENGPDF2085 KB

Approvals: WHA-BLT-F9D0-N-A0-Z1-1

Language Selection:
CertificatesCertificate No.LanguageFile TypeFile Size
Canada FM Certificate of ComplianceCoC 3041762CALLPDF40 KB
USA FM Certificate of ComplianceCoC 3041762ALLPDF40 KB

Software: WHA-BLT-F9D0-N-A0-Z1-1

Language Selection:
Device Description Files/DriversRelease InfoFile TypeFile Size
DTM WirelessHART Adapter WHA-BLT* "Bullet" / DTM WirelessHART Adapter WHA-BLT* "Bullet"ZIP16481 KB
FHX-File WirelessHART Adapter WHA-BLT* "Bullet" / FHX-Datei WirelessHART Adapter WHA-BLT* "Bullet"ZIP1115 KB
DD WirelessHART Adapter WHA-BLT* "Bullet" / DD WirelessHART Adapter WHA-BLT* "Bullet"ZIP3513 KB

Associated Products: WHA-BLT-F9D0-N-A0-Z1-1

Accessories
Device DTMpa
Adapter male thread metric to female thread metric, Adapter male thread metric to female thread NPT, Metric and NPT versions available, Brass nickel-plated or stainless steel, Ex db, Ex eb and Ex tb certified, Suitable for operation in Zone 1, Zone 2, Zone 21 and Zone 22pa