Serviceline Industrial Sensors
Phone: 330-486-0001
Fax: 330-405-4710
Serviceline Explosion Protection
Phone: 330-486-0002
Fax: 330-963-5827

RFID read/write device IUH-F192-V1-FR2-02

IUH-F192-V1-FR2-02
  • Flexible UHF read/write head with long range for use worldwide
  • Ready-made PLC function blocks designed for quick and easy system integration
  • Compact and robust housing for harsh industrial environments
  • Switchable antenna polarization guarantees reliable tag detection and enhances process flow
  • For connection to IDENTControl evaluation unit
  • Multi-tag reading increases productivity

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  IUH-F192-V1-FR2-02

Product Description
UHF RFID read/write device for IDENTControl, USA and Canada
General specifications
Operating frequency902 … 928 MHz: USA, Canada
Transmission licenses for other countries on request
Emitted power10 ... 4000 mW EIRP adjustable
UL File NumberE468231
MTBF64 a (Operation at +40 °C)
Indicators/operating means
LED greenPower on
LED yellowRead/write operation successful
LED blueTransmission mode
Electrical specifications
Power consumption≤ 10 W
Supplyfrom the IDENTControl
Standard conformity
Degree of protectionEN 60529
RFIDISO/IEC 18000-63
Approvals and certificates
FCC approvalThis device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Caution:
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
IC approvalThis device complies with Industry Canada licence-exempt RSS standard(s) and with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Radio approvalUSA: FCC IREIUHF192V1B
Canada: 7037A-IUHF192V1B
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Degree of protectionIP67
Connectionconnector M12 x 1
Material
HousingPA 6
Basediecast aluminum
Massapprox. 3000 g
Dimensions
Height81 mm
Width270 mm
Length268 mm

Classifications

SystemClasscode
ECLASS 13.027280401
ECLASS 12.027280401
ECLASS 11.027280401
ECLASS 10.0.127280401
ECLASS 9.027280401
ECLASS 8.027280401
ECLASS 5.127280401
ETIM 9.0EC002998
ETIM 8.0EC002998
ETIM 7.0EC002998
ETIM 6.0EC002998
ETIM 5.0EC002998
UNSPSC 12.143211710

Details: IUH-F192-V1-FR2-02

Function

The IUH-F192-V1-FR2-02 read/write head operates in the UHF frequency range and is optimized for use in industrial applications involving greater distances. The device reads and writes passive tags according to EPC Generation 2 (ISO/IEC 18000-63). The read/ write head can be operated in the USA, Canada and Mexico. The read/write head complies with the respective radio regulations.

Wide range of options supported for filtering data. The read/write head is connected to the IDENTControl interface using an M12 connector. The user can monitor the status of the read/write head using the integrated LEDs.

The read/write head has a typical detection range of approx. 3 meters; this range is determined by the tag used and can be changed by adjusting the transmission power. Other influencing factors are the application specific setup and surrounding materials, particularly metal. The read and write distances measured under ideal conditions can be found in a separate document. For the actual read and write distances under real conditions, the combination of read/write head and tag must be tested in the intended application.

Informative Literature: IUH-F192-V1-FR2-02

Language Selection:
LiteratureLanguageFile TypeFile Size
Application Report - Fully Automatic Component Tracking for Prefabricated Home ProductionENGPDF205 KB
Application Report - RFID Systems in Industrial Metal StampingENGPDF1773 KB

Product Documentation: IUH-F192-V1-FR2-02

Language Selection:
ManualsLanguageFile TypeFile Size
Manual IUH-F192-V1-*ENGPDF2832 KB

Design / Simulation: IUH-F192-V1-FR2-02

Language Selection:
CADLanguageFile TypeFile Size
CAD 3-D / CAD 3-DALLSTP5360 KB
CAD Portal / CAD PortalALLLINK---

Approvals: IUH-F192-V1-FR2-02

Language Selection:
CertificatesCertificate No.LanguageFile TypeFile Size
Canada Radio Approval7037A-IUHF192V1BALLPDF736 KB
Canada, USA ULCoC 2022-12-20-E468231ALLPDF530 KB
USA FCC ApprovalIREIUHF192V1BALLPDF188 KB

Associated Products: IUH-F192-V1-FR2-02

Accessories

2,700.00  USD

Contact Us

IDENTControl control interface with Ethernet interface for TCP/IP, PROFINET, EtherNet/IP, and MODBUS TCP protocolsfa

1,684.00  USD

Contact Us

IDENTControl Compact control interface with Ethernet interface for TCP/IP, PROFINET, EtherNet/IP, and MODBUS TCP protocolsfa

1,581.00  USD
Netlist price. Your individual price will be calculated during checkout.

In stock

IDENTControl Compact RFID evaluation unit with EtherCAT interfacefa
Control interface unit IDENTControl Compactwith serial interface RS-232 and RS-485fa
Control interface unit IDENTControl Compact with interface for PROFIBUS DPfa
Data carrier for autoclave applicationsfa
RFID Transponderfa
51.00  USD
Netlist price. Your individual price will be calculated during checkout.

In stock

RFID Transponderfa
72.00  USD
Netlist price. Your individual price will be calculated during checkout.

In stock

RFID Transponderfa
RFID Transponderfa
Mounting bracket for wall mountingfa
Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa
43.00  USD
Netlist price. Your individual price will be calculated during checkout.

In stock

Cordset M12 socket straight to M12 plug angled A-coded, 4-pin, PUR cable grey, shieldedfa
58.00  USD
Netlist price. Your individual price will be calculated during checkout.

In stock

Cordset M12 socket straight to M12 plug angled A-coded, 4-pin, PUR cable grey, shieldedfa
Cordset M12 socket straight to M12 plug angled A-coded, 4-pin, PUR cable grey, shieldedfa
Visit the RFID Hub

Visit our "RFID Hub"—this special website is a knowledge base for RFID. Get answers on frequently asked questions and learn about typical RFID applications …