Serviceline Industrial Sensors
Phone: 330-486-0001
Fax: 330-405-4710
Serviceline Explosion Protection
Phone: 330-486-0002
Fax: 330-963-5827

Type X and Ex pxb purge and pressurization control unit 6000 Control System

6000 Control System
  • Certified for Class I, Class II, Division I; Zone 1 / Zone 21 to nonhazardous
  • Intrinsically safe electrical/pneumatic manifold assembly
  • Intrinsically safe user interface for programming and monitoring the system
  • Enclosure volume up to 450 ft3 (12.7 m3)
  • Control Unit monitors system operation and controls enclosure power
  • Universal mounting (brackets included)
  • 316L stainless steel Type 4X enclosure

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  6000 Control System

Product Description
6000 Series Type X and Ex pxb purge and pressurization system control unit
General specifications
Operating modemanual, semi-automatic, or fully automatic - programmable
Series6000 Series
Number of volume exchanges4 to 19
Hazardous environmentgas, dust, gas and dust
Supply
Rated voltage90 ... 264 V AC, 48 ... 62 Hz / 0.2 A
20 ... 30 V DC
Electrical specifications
ConnectionTerminal blocks
Input
Input IInputs 1, 2, 3, 4: contact input, 5 VDC @ 2 mA
Input typeintrinsically safe
Input IITemperature inputs
Input typeintrinsically safe
Sensor type6000-TEMP
Input IIIEPV-6000 Vent
Input typeintrinsically safe
Input IVUser interface module
ConnectionM8 connector, 4-pin
Input typeintrinsically safe
Output
Output IAUX 1
Output typeDry contacts, SPDT
Inrush current5 A
Contact loading2 A @ 240 VAC resistive load
2 A @ 24 VDC
Output IIAUX 2
Output typeDry contacts, SPDT
Inrush current5 A
Contact loading2 A @ 240 VAC resistive load
2 A @ 24 VDC
Output IIIENC_1, ENC_2 (protected enclosure contacts)
Output typeDry contacts (2) SPST, NO
Contact loading8 A @ 240 VAC / 120 VAC resistive load
8 A @ 24 VDC
Indicators/settings
LED indicationSafe pressure: Blue - safe pressure is achieved
Enclosure power: Green - power on; Red - power off
Rapid exchange: Blue - purging is running
System bypass: Yellow - bypass is activated
Alarm fault: Red (blinking) - any alarm input detected; Red (solid) - 6000 series system fault
Pneumatic parameters
Protective gas supplyinstrument grade air or inert gas
Pressure requirement20 ... 120 psig (1.4 ... 8.3 bar) (138 ... 827 kPa) regulated
Safe pressureGas: 0.25" wc (6.4 mm wc) (0.625 mbar) (62 Pa)
Dust: 0.65" wc (16.5 mm wc) (1.6 mbar) (162 Pa)
Gas and Dust: 0.65" wc (16.5 mm wc) (1.6 mbar) ( 162 Pa)
Purge flow rateMaximum flow rate measurement for enclosure size (enclosure volume:flow rate):
< 20 ft3 (0.57 m3): 5, 12 SCFM (141, 340 l/min), or dynamic
20 ... 30 ft3 (0.57 ... 0.85 m3): 5, 12, 20 SCFM (141, 340, 565 l/min), or dynamic
> 30 ft3 (0.85 m3): 5, 12, 20, 30 SCFM (141, 340, 565, 850 l/min), or dynamic
Purge flow and enclosure pressure rateWith EPV-6000-xx-01, EPV-6000-xx-02
5 SCFM @ 1.5" wc, (141 l/min @ 3.7 mbar)
12 SCFM @ 2.0" wc, (340 l/min @ 5.0 mbar)
20 SCFM @ 2.7" wc, (565 l/min @ 6.7 mbar)
30 SCFM @ 4.1" wc, (850 l/min @ 10.2 mbar)

With EPV-6000-xx-03, EPV-6000-xx-04
5 SCFM @ 2.1" wc, (141 l/min @ 5.2 mbar)
12 SCFM @ 2.6" wc, (340 l/min @ 6.5 mbar)
20 SCFM @ 4.1" wc, (565 l/min @ 10.2 mbar)
30 SCFM @ 5.3" wc, (850 l/min @ 13.2 mbar)

With EPV-6000-xx-05, 06
5 SCFM @ 1.8" wc, (141 l/min @ 4.5 mbar)
12 SCFM @ 2.9" wc, (340 l/min @ 7.3 mbar)
20 SCFM @ 7.4" wc, (565 l/min @ 18.5 mbar)
Flow rate for leakage compensationDepends on enclosure seal.

With EPV-6000-xx-01, EPV-6000-xx-02
0.35 SCFM @ 0.25" wc (10.0 l/min @ 6.3 mbar)
1.0 SCFM @ 0.75" wc (28.0 l/min @ 1.9 mbar)

With EPV-6000-xx-03, EPV-6000-xx-04
0.22 SCFM @ 0.25" wc (6.2 l/min @ 6.3 mbar)
0.58 SCFM @ 0.75" wc (16.4 l/min @ 1.9 mbar)

With EPV-6000-xx-05, EPV-6000-xx-06
0.15 SCFM @ 0.25" wc (4.2 l/min @ 6.3 mbar)
0.35 SCFM @ 0.75" wc (10.0 l/min @ 1.9 mbar)
Ambient conditions
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Storage temperature-30 ... 80 °C (-22 ... 176 °F)
Relative humidity5 ... 95 %, noncondensing
Vibration resistance5 ... 100 Hz , 1 g, 12 m/s2, all axes
Impact resistance30 g, 11 ms, all axes
Mechanical specifications
Connection typePneumatic :
Inlet fitting to manifold: 3/8" NPT (female)
Outlet fitting from manifold: 3/8" bulkhead fitting (provided)
Cable gland4 - M16 x 1.5 cable gland
Degree of protectionType 4X , IP66
MaterialEnclosure: 316L (UNS S31603) stainless steel
Manifold valve: anodized 6082 aluminum
Fittings: 316L (UNS S31603) stainless steel
Mass-WH- 11.4 kg (25 lb)
-CK- 7.2 kg (16 lb)
Dimensions183 x 367.5 x 152.5 mm (7.20 x 14.45 x 6.00 inch)
Height367.5 mm
Width183 mm
Depth152.5 mm
Data for application in connection with hazardous areas
EU-type examination certificate
Marking6000 main control unit with housing
6000-xx-S2-UN-xx-xx:
ATEX UL/Demko 07 ATEX 0705753X
II 2 G Ex db ib [ib Gb] [pxb Gb] IIC T4 Gb (-20 °C ≤ Ta ≤ 60 °C)
II 2 D Ex ib tb [ib Db] [pxb Db] IIIC T60°C Db (-20 °C ≤ Ta ≤ 50 °C)

6000 main control unit kit version
6000-xx-S2-UN-CK-xx:
ATEX UL/Demko 07 ATEX 0705753X
II 2 G Ex db [ib Gb] [pxb Gb] IIC T4 Gb (-20 °C ≤ Ta ≤ 60 °C)
II 2 D Ex tb [ib Db] [pxb Db] IIIC T80°C Db (-20 °C ≤ Ta ≤ 60 °C)

User interface
6000-UIC-xx:
ATEX UL/Demko 07 ATEX 0705753X
II 2 G Ex ib [pxb Gb] IIC T4 Gb
Directive conformity
Directive 2014/34/EUIEC/EN 60079-0
IEC/EN 60079-1
IEC/EN 60079-2
IEC/EN 60079-11
IEC/EN 60079-31
Directive 94/9/EC
International approvals
UL approval6000 Main control unit with housing
6000-xx-S2-UN-xx-xx:
cULus
Class I, Division 1, Groups A,B,C,D T4 (-20 °C ≤ Ta ≤ 60 °C)
Class II, Division 1, Groups E,F,G T4 (-20 °C ≤ Ta ≤ 50 °C)
Class I, Zone 1, Group IIC T4 (-20 °C ≤ Ta ≤ 60 °C)
Class II, Zone 21, Group IIIC T60 °C (-20 °C ≤ Ta ≤ 50 °C)
[Ex i] Associated Equipment
Ex db ib [ib Gb] [pxb Gb] IIC T4 (-20 °C ≤ Ta ≤ 60 °C)
Ex ib tb [ib Db] [pxb Db] IIIC T4 (-20 °C ≤ Ta ≤ 50 °C)
6000 Main control unit kit version
6000-xx-S2-UN-CK-xx:
cULus
Class I, Division 1, Groups A,B,C,D T4 (-20 °C ≤ Ta ≤ 60 °C)
Class II, Division 1, Groups E,F,G T4 (-20 °C ≤ Ta ≤ 60 °C)
Class I, Zone 1, Group IIC T4
Class II, Zone 21, Group IIIC T60 °C
[Ex i] Associated Equipment
Ex db [ib Gb] [pxb Gb] IIC T4 X (-20 °C ≤ Ta ≤ 60 °C)
Ex tb [ib Db] [pxb Db] IIIC T4 X (-20 °C ≤ Ta ≤ 60 °C) User interface 6000-UIC-xx: cULus (-20 °C ≤ Ta ≤ 60 °C) Class I, Division 1, Groups A,B,C,D T4 Class I, Zone 1, Group IIC T4 Ex i Intrinsically safe
IECEx approval6000 Main Control unit with housing
6000-xx-S2-UN-xx-xx:
IECEx UL 08.0003X
Ex db ib [ib Gb] [pxb Gb] IIC T4 Gb (-20 °C ≤ Ta ≤ 60 °C)
Ex ib tb [ib Db] [pxb Db] IIIC T60 °C Db (-20 °C ≤ Ta ≤ 50 °C)
6000 Main control unit kit version
6000-xx-S2-UN-CK-xx:
IECEx UL 08.0003X
Ex db [ib Gb] [pxb Gb] IIC T4 Gb (-20 °C ≤ Ta ≤ 60 °C)
Ex tb [ib Db] [pxb Db] IIIC T80 °C Db (-20 °C ≤ Ta ≤ 60 °C) User interface 6000-UIC-xx: IECEx UL 08.0003X Ex ib [pxb Gb] IIC T4 Gb
General information
Supplementary informationEC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.

Classifications

SystemClasscode
ECLASS 13.027180508
ECLASS 12.027180508
ECLASS 11.027180508
ECLASS 10.0.127180508
ECLASS 9.027180508
ECLASS 8.027180508
ECLASS 5.140050501
ETIM 9.0EC000243
ETIM 8.0EC000243
ETIM 7.0EC000243
ETIM 6.0EC000243
ETIM 5.0EC000243
UNSPSC 12.139121301

Details: 6000 Control System

Function

The 6000 series consists of the control unit (EPCU)and user interface(UIC) mounted in a 316L stainless steel Type 4X (IP66) enclosure with the pneumatic solenoid valve mounted on the unit. The EPV-6000 relief vent is separate and is mounted to the enclosure.

The user interface allows programming of up to 4 switch inputs, temperature modules, enclosure power contacts, 2 auxiliary outputs, and various operational functions. Also, the user interface screen allows monitoring and easy configuration.

Among the additional features are inputs for system bypass, enclosure power on/off, temperature overload and activation of Rapid Exchange flow for cooling or auxiliary relay for separate cooling source, and delay power shutdown.

Component kits are available for custom installations.

Informative Literature: 6000 Control System

Language Selection:
LiteratureLanguageFile TypeFile Size
Pepperl+Fuchs BEBCO EPS 6000 Series Purge and Pressurization SystemUSAPDF1883 KB

Product Documentation: 6000 Control System

Language Selection:
Product informationLanguageFile TypeFile Size
Basic Explosion Protection Compendium - Type of Protection "Purge and Pressurization"ENGPDF3860 KB
The 6000 Series New Firmware & Temperature Hub and SensorsUSAPDF2761 KB
Brief Instructions
Programming Tree 6000 Series Purge/Pressurization SystemENGPDF1157 KB
Programming Worksheet 6000 Series Purge/Pressurization SystemENGPDF1399 KB
Safety and Security Documentation
Instruction manualENGPDF174 KB
Manuals
Installation and Operation Manual 6000 Series Purge/Pressurization System (USA English)ENGPDF13802 KB

Design / Simulation: 6000 Control System

Language Selection:
CADLanguageFile TypeFile Size
2D / DXF Files for 6000 Series component kit / CAD 2-DALLZIP1162 KB
CAD and STP drawings of 6000 Series complete unit / CAD 2-DALLZIP6729 KB

Approvals: 6000 Control System

Language Selection:
CertificatesCertificate No.LanguageFile TypeFile Size
ATEX CertificateDEMKO 07 ATEX 0705753XALLPDF360 KB
Brasil TUV Rheinland BrazilTÜV 22.1421XALLPDF1291 KB
China SITIIAS CCC Ex Certificate2020322304003056 (Katy, TX USA)ALLPDF5433 KB
IECEx Certificate of ConformityIECEx UL 08.0003XALLLINK---
Korea KOSHA14-AV4BO-0083ALLPDF322 KB
PESO (India) CCOEA/P/HQ/MH/104/4757 (P383926)ALLPDF103 KB
UL Hazardous LocationE184741 (RFPW, RFPW7 , RFPZ7)ALLPDF741 KB
Control Drawings
Control drawing UL / Control drawing UL   ALLPDF711 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-B066DALLPDF162 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)DOC-B0F5ALLPDF159 KB

Associated Products: 6000 Control System

Accessories
Termination board for the 6000 Series Purge systempa
EPV-6000 Ventpa

Get to know the smartest way to ensure hazardous location protection and configure your individual purge and pressurization system!

Our interactive app gives you a step-by-step programming simulation for your purge and pressurization system. Download the free-of-charge app for iOS or Android devices now …