Barcode Reader
Group Overview:
Barcode Reader
PowerScan barcode readers are certified for use in hazardous areas Zone 1/21 (for Zone 21 only wired version) and are available as wired versions as well as a wireless system, consisting of a wireless handheld, base station, and charger.
With PowerScan all common 1D-barcode families can be captured. Patented technology effectively reads damaged and difficult-to-read barcodes. The rugged housing ensures full functionality, even after being dropped from a height of two meters.
Three green LEDs located on the top and back of the barcode reader are visible from any angle and confirm that the code has been read successfully. Configuration is fast and is simplified by capturing system barcodes.
Wired barcode reader
PowerScan wired barcode reader
PScan-D is the wired version of the PowerScan barcode readers for use in hazardous areas. It is designed to connect to VisuNet Operator Workstations and TERMEX Operator Panels. Alternatively it can be connected to a Host PC located in the safe area. Distance can be up to 150 m (492 ft) by using a connection box.
Wireless barcode reading systems
Wireless barcode reading system
The wireless barcode reading system comprises the handheld PScan-M and the base station PScan-B for use in hazardous areas as well as the charger PScan-C, which will be installed in the safe area. The comfortable reading distance of 1100 mm and the range from the base station up to 50 meters to the interpreting device meets user requests for data capturing under industrial conditions.
The wireless barcode reading system can be used in combination with VisuNet Operator Workstations, TERMEX Operator Panels as well as a stand-alone solution.
Accessories for barcode readers
PowerScan barcode reading systems are complemented by the following accessories:
- Box-A9-PScan for use of the PScan-D with the Host PC via an intrinsically safe power supply
- Holder for barcode reader
- Cables and adapters as interface to connectors with older design
- Intrinsically safe power supply ENT-DC with interface converters. The module is installed in the safe area and supports RS232-, TTY- and RS485-interfaces. It runs with 24 V DC and is available in various housings for rail mounting, for 19 inch racks and for direct wall-mounting