Serviceline Industrial Sensors
Phone: 330-486-0001
Fax: 330-405-4710
Serviceline Explosion Protection
Phone: 330-486-0002
Fax: 330-963-5827

New ENX AS-Interface Gateways Combine Advanced Features

with support for Modbus/TCP and Ethernet/IP protocols to maximize system uptime

ENX AS-Interface Gateways
ENX AS-Interface Gateways

ENX Series AS-Interface Gateways support both Modbus/TCP and Ethernet/IP protocols for seamless communication with standard and safety networks in a single gateway.  They also include a number of advanced features for enhanced network performance and diagnostics retrieval. 

“These gateways provide significantly more than just an easy transition from Ethernet to AS-Interface.  In the past, two separate gateways were required to connect to Modbus/TCP and Ethernet/IP. With the new ENX series, the entire AS-Interface network is controlled by a single, very powerful, AS-Interface gateway,” says Tim Cicerchi, Product Manager, Industrial Bus and ID Systems, Pepperl+Fuchs. 

With ENX gateways, 992 I/O are handled asynchronous to the Ethernet traffic.  These fast gateways also scan every AS-Interface node in 150µs, which enables up to 62 safety e-stops, magnetic switches, and safe outputs to be in one easy to use safety program. 
 
Single master, dual master and dual master with built in safety monitor versions are available to satisfy various AS-Interface application requirements.  Dual network versions feature redundant power supply connections where either power supply can fail, and the gateway will continue to run while reporting the error to the upper level system.  ENX gateways also come standard with integrated duplicate address, noise, and ground fault detection functionality.

Options include a16-channel safety version with up to 4 onboard safety channels, where up to 16 channels can be remotely activated using safe output modules.  An available memory card enables users to quickly and easily program remote gateways, and to transfer a gateway configuration and safety program from a failed gateway to a replacement gateway.

“The built in memory card is a very innovative approach to reducing downtime.  In the past a maintenance engineer or programmer would have to use a laptop and connect using Ethernet or RS232 serial connections.  Only then could a download be made to a new gateway.  Now a simple swap of memory cards and a few keystrokes on the keypad will transfer the data automatically,” explains Cicerchi.

Gateways are modules that form an interface between the AS-Interface and higher-level buses.  You can install gateways to provide a solution for complex applications using standard products.  The gateways act as a slave for the higher-level bus.